Pure Water Care
Apartemen Sentra Timur Tower Hijau Unit H08EB
Jl. Pahlawan Komarudin Raya Sisi Timur Toll Lingkar Luar Pulo Gebang Jakarta Timur
Pembelian WA ke 08121306654,
Website: www.purewatercare.com Email: purewatercare@gmail.com
Jam Pelayanan :WFO: Selasa, Rabu,Kamis, Sabtu (Pukul 08.00 s/d 17.00 wib), WFH: Senin, Jumat, Minggu
Maaf, sekarang jam 00:18:05 toko tutup, buka pukul 08.00 wib. Tinggalkan pesan WA ke 0812-130-6654
Ozone Injector (Venturi) adalah alat untuk mengijeksi gas ozone kedalam aliran air menuju tangki penampungan atau menuju proses berikutnya. Kami menjual ozone injection (Venturi) dari Taiwan yang berfungsi untuk menyuntikan ozone ke dalam aliran air sehingga proses sterilisasi dan oksidasi ozone berlangsung selama air mengalir.
Harga Arang Aquarium
Harga Arang Aquarium kami menyarankan produk purewatercare dibawah ini WA: 0852-1730-4428
Karbon Aktif Calgon Filtrasorb F100 1 Sak (25 Kg)
Harga pasaran = Rp. 3.000.000,- Harga jual kami = Rp. 2.550.000,- Keuntungan Anda = Rp. 450.000,-
Hemat 15%
Ongkir Jabodetabek = Rp. 99.000,-
Ongkir Jawa = Rp. 132.000,-
Ongkir Luar Jawa = Rp. 198.000,-
Ongkir Aceh,Kepri,Papua,Maluku = Rp. 264.000,-
Karbon aktif Calgon Filtrasorb 100 adalah karbon aktif buatan USA dan berisi 25 kg per sak. Fungsi karbon aktif ini adalah untuk menghilangkan bau banger,
bau kaporit atau untuk menyerap bau dan gas di ruangan. Secara umum karbon aktif adalah karbon yang di proses sedemikian rupa sehingga pori-porinya terbuka, dan dengan demikian akan
mempunyai daya serap yang tinggi. Karbon aktif merupakkan karbon yang bebas serta memiliki permukaan dalam (internal surface), sehingga mempunyai daya serap yang baik.
Keaktifan daya menyerap dari karbon aktif ini tergantung dari jumlah senyawa kabonnya yang berkisar antara 85 % sampai 95% karbon bebas. Karbon aktif yang berwarna hitam, tidak berbau,
tidak terasa dan mempunyai daya serap yang jauh lebih besar dibandingkan dengan kabon aktif yang belum menjalani proses aktivasi, serta mempunyai permukaan yang luas,
yaitu memiliki luas antara 300 sampai 2000 m/gram.
FILTRASORB-100
Granular Activated Carbon
Description
FILTRASORB 100 is a granular activated carbon developed by Calgon Carbon Corporation for the removal of taste and odor compounds, disinfection by-products, low level volatile organic compounds,
and other targeted compounds from water and wastewater. This activated carbon is manufactured by steam activation of select grades of bituminous coal which have been pulverized then
reagglomerated. The combination of coal type, agglomeration and carefully controlled high-temperature activation ensures a durable activated carbon product with a wide range of pore sizes for
effective adsorption. The product is also designed to comply with all the applicable provisions of the AWWA B604 Standard for Granular Activated Carbon, the stringent extractable requirements
of ANSI/NSF Standard 61, and the Food Chemicals Codex.
Features
- Calgon Carbon's agglomerated coal-based granular activated carbons have several properties which provide superior performance in a wide range of applications.
- Produced from a pulverized blend of high quality bituminous coals resulting in a consistent high quality product.
- The activated carbon granules are uniformly activated through the whole granule, not just the outside. This results in excellent adsorption properties and constant adsorption kinetics in a wide range of applications.
- The agglomerated structure ensures proper wetting while also eliminating floating material.
- High mechanical strength relative to other raw materials, thereby reducing the generation of fines during backwashing and hydraulic transport.
- Carbon bed segregation is retained after repeated backwashing, ensuring the adsorption profile remains unchanged and therefore maximizing the bed life.
- Reagglomated with a high abrasion resistance provides excellent reactivation performance.
- High density carbon resulting in a greater adsorption capacity per unit volume.
Specifications' FILTRASORB 100
Iodine Number : 850 mg/g (min)
Moisture Content : 2% (max) wt %
Effective Size : 0.8 -1.0 mm
Uniformity Coefficient : 2.1 (max)
Abrasion Number : 75 (min)
Screen Size Distribution, US Sieve Series
On 8 mesh : 15% (max) wt %
Through 30 mesh : 4% (max) wt %
'Calgon Carbon test method
Typical Properties : FILTRASORB 100
Apparent Density : 0.58 g/cc
Ash Content : 8% wt %
Water Soluble Ash : <1% wt %
Non-Wettable : <1% wt %
Thermal Reactivation and Recycle
When FILTRASORB 100 granular activated carbon becomes saturated or the treatment objective for the carbon has been reached, it can be returned to a Calgon Carbon facility for reactivation and re-use.
Reactivation is a high-temperature, controlled thermal process during which the adsorbed organics are destroyed and adsorptive capacity is restored. As a result of the reactivation process,
the activated carbon can be safely and cost-effectively recycled for re-use. FILTRASORB 100 is an ideal carbon for reactivating and recycle with minimal losses due to its homogeneous porosity and high
abrasion resistance / high mechanical strength.
Reactivation provides multiple benefits to the user, including:
- A reliable supply of carbon at lower cost
- Reduced CO2 footprint as compared to virgin carbon
- Elimination of the expense and potential long-term liability associated with alternate disposal
- Waste minimization and conservation of natural materials.
Applications
FILTRASORB 100 activated carbon is used to treat surface and groundwater sources. FILTRASORB 100 functions as a dual purpose media providing both filtration and adsorption.
This carbon is used as a complete replacement for sand and anthracite media. FILTRASORB has been used successfully in many water treatment applications for over 40 years.
Design Considerations
As a replacement for existing filter media, conversion to FILTRASORB 100 granular activated carbon imposes no major change to a plant's normal filtration operations for potable water.
If more contact time is required, the height of the backwash troughs can be increased. Calgon Carbon Corporation can also provide complete modular adsorption systems as an add-on treatment
stage if required.
Packaging
55 lb. (25 kg) poly bag
1,000 lb. (454 kg) super sack Bulk truck
Safety Message
Wet activated carbon preferentially removes oxygen from air. In closed or partially closed containers and vessels, oxygen depletion may reach hazardous levels.
If workers are to enter a vessel containing carbon, appropriate sampling and work procedures for potentially low oxygen spaces should be followed, including all applicable Federal and
State requirements.
Untuk keperluan tertentu kami menyediakan karbon aktif lokal ukuran mesh 6-12 dan 8-30 atau sesuai permintaan dengan iodine number absorption mulai dari 700 s/d 1000 mg/g.
Untuk order jenis tertentu ini diperlukan minimum order sebanyak 1,5 ton (1500 kg) dengan harga mengikuti tabel dibawah ini:
No
Item
Mesh (Inchi)
Iodine Number (mg/g)
Kemasan/Bag
Harga/Kg
Ongkos Kirim (Rp)
Jakarta
Bodetabek+Jawa
Luar Jawa
1.
Karbon Aktif Lokal (Batok Kelapa)
mesh 6-12
<800
50Kg
Rp.10.000,-
Rp250/kg
Rp500/kg
Rp750/kg
<1000
50Kg
Rp.15.000,-
Rp250/kg
Rp500/kg
Rp750/kg
mesh 8 - 30
<800
50Kg
Rp.10.000,-
Rp250/kg
Rp500/kg
Rp750/kg
<1000
50Kg
Rp.15.000,-
Rp250/kg
Rp500/kg
Rp750/kg
mesh 12-40
<800
50Kg
Rp.10.000,-
Rp250/kg
Rp500/kg
Rp750/kg
<1000
50Kg
Rp.15.000,-
Rp250/kg
Rp500/kg
Rp750/kg
Untuk pembelian mohon hubungi nomor HP/WA di atas (diheader) atau klik keranjang belanja ini
Harga adalah Franco Jakarta belum termasuk ongkos kirim, beaya pengiriman disesuaikan dengan jumlah order dan wilayah pemesan.
Waktu pengiriman untuk luar jawa +/- 1 minggu.
Sistem pembayaran cash atau via transfer ke salah satu rekening berikut ini:
Nama Bank : Bank Mandiri
Cabang : Perumnas Klender Jaktim
Atas nama : Murdiyanto No. Account : 1660-0000-7749-5
Nama Bank : BCA
Cabang : Menara Bidakara Jaksel
Atas nama : Murdiyanto No. Account : 450-119-8573
Nama Bank : BRI
Cabang : Kalimalang Jaktim
Atas nama : Murdiyanto No. Account : 0997-0102-8965-538
Cara pemasangan tangki air dapat dilakukan dengan berbagai cara diantaranya menggunakan tower, dak, dan ditaruh diatas lantai. Masing-masing cara tersebut membutuhkan pondasi yang dibuat
dengan baik dan benar untuk semua jenis tangki air. Setiap 1000 liter air memiliki berat 1 ton, sehingga sangat penting dalam mempertimbangkan pembuatan